|STRUCTURE CHART OF
ALUMINUMPLASTICS COMPOUND TUBE
The aluminum-plastics compound tube's inner and outer layers are both of PE, clean, non-pollutant,smooth. Thermo-
melt layer and inner PE layer are copressed and bonded into one togeher at a step.Its mid-layer and aluminum can
100% anti-leakage of gas with all of metals'strong points and without any of their weak points.
COLD OR HOT WATER TUBE SYSTEM
The aluminum-plastics compound tube is smooth inside, non-lust,antisepeic, non-water fouling.30% more than metal
tube's flowing quantity, easily-curving,able to directly install round pole or beam or bury into wall or cemented mixtu
-re,able to deteet out its place with only a simple metal detector,so best alum inum plastics compound tube is very suitable for in dustry or civil architecture's cold or hot water tube line system.
INOORS GAS TUBB YWSTEM
Vertical welded aluminum tube layer between outer and inner PE layers with special thermomelt glue strongly bonded closely and firmly so as to make the whole tube endure high work pressure without zero leakage of gas(oxygen).The tube is longer so as to decrease joints and avoid possible leakage chance .Thus this kind of tube can be used in pressed air/gas/oxygentransferring reliably
SUNLIGHT CONDITIONER TUBE SYSTEM
Vertical welded aluminum tube is unable to frost,with good warmth-proteeting , able to save cost and raise the efficiency of sunlight and airconditloner system.